Grinding Wheel - 200 x 38 x 50.8 5TGP 80HV (GW1543)

Type 1 Straight,

35m/s

Norton Part No. Part No. 721033

• TG Abrasive Technology From NORTON is a high performance SG ceramic aluminium oxide abrasive for bonded Abrasive grinding wheels
• Delivers high levels of productivity and extremely high quality results to help improve process productivity and results on metal applications.
• TG wheels are extremely good at keeping their form and give maximum part productivity through reduced cycle times an low power draw.

• Norton SG grain is controlled by extrusion.
• TG grains in products such as Targa and Altos are typically extruded at a ratio of anywhere between 4:1 - 8:1 giving them rod or 'worm' like characteristics.
• The resulting natural packing of these grains give the grinding wheel higher strength, light weight structure with porosity levels at 70% or greater.
• The grains touch each other at only a few points where the bond concentrates like spot welds.
• The Norton TG range offers potential for higher stock removal rates and higher wheel speeds due to the strength and density of the resulting wheel body.